If you need the Smartest Air Purifiers, Diffusers, and Humidifiers – Airversa is the One Stop shop. Helping you to improve and provide a great quality of air from ages. You can never go wrong by picking up an Airversa Product. To access smart home automation by connecting Airversa Purelle to Homekit and change the air quality you breathe to good. Here is a Guide to help you out.
Does Airversa work with Homekit?
Yes, The Airversa Purelle works with Homekit. With the Exclusive support for Apple Homekit, Airversa has introduced the Airversa Purelle Smart Air Purifier (AP2) over Thread. It is the First ever Thread Enabled Apple Home Purifier with Smart features. The Airversa HomeKit Air Purifier over Thread Works with HomeKit 3-Stage H13.Also is a True HEPA Smart Air Cleaner with 1000 sq. ft Purelle AP2. This smart air purifier enables you to connect Airversa Purelle to Homekit using the Thread Technology.
Also, Check Out: Connect Levoit Purifiers to Homekit
Airversa Air Purifier Homekit Compatible
Currently, There is only One Airversa Homekit-compatible device available. That is The Purelle Smart Air Purifier AP2.It’s a 3-in-1 Air filter with True HEPA that eliminates Smoke, Unpleasant odor, and Pollen and gives you Clear Air. Buy the Device on Amazon or through the Official Site and You will get the following in the box.
- Purelle Smart Air Purifier.
- Power Adapter.
- Composite Filter Set.
Mandatory Requirements to connect Airversa Purelle to Homekit using the Thread
- Apple Home Hub ;
>>Apple TV 4K (3rd generation) WiFi + Ethernet or Apple TV 4K (2nd generation ).
OR
>>HomePod mini / HomePod 2nd Generation.
- iOS Devices – iPhone /iPad to Install the App.
- Thread Border Router. ( HomePod or Apple TV).
How to Connect Airversa Purelle to Homekit?
If you have a Purelle Smart Air Purifier, There are two ways you can connect Airversa Purelle to Homekit flawlessly.
- Apple Home App.
- SleekPoint App. – It is the manufacturer’s app
Both apps can be used on your iOS Devices and You can control your Air Purifier easily. Here is a Stepwise guide to Connect Airversa Purelle to Homekit.
Set up the Airversa Purelle Air Purifier
- Firstly, It is important to Set up your Homekit Supported Air Purifiers.
- Unscrew the Knob and remove the base.
- Unwrap the Filters and Install them into the Product.
- Attach the base and tighten the knob.
- Plugin and Connect the Purifier to a standard AC Unit Outlet.
- Tap Power ON to Turn it ON.
Airversa Purelle to Homekit using the Thread
Since Thread is built in, All you need to have is a Thread Border Router/Home Hub. This will help you to access control and communicate with your devices remotely -with no wifi. Using the Thread Border Router, Purelle can bridge to Nanoleaf bulbs, Eve Light Switch, and Wemo too. Effectively expanding your Thread Network, So you can control on Homekit.
However, Without a Thread Router, You can also use Bluetooth making sure your devices are within range to control.
Connect Airversa Purelle to Homekit on the Apple Home App
- Make sure to already set up Apple Home Hub.
- Install the Apple Home App on your Apple Device.
- On your Purifier, Press and Hold the Network button on the touch panel.
- Release Once you hear 3 beeps, meaning you have entered the Pairing mode.
- Keep your iOS Device close to the Purelle Air Purifier.
- Turn ON Bluetooth and Open the Home App.
- Tap + and Click on Add Accessory.
- Scan the QR Code – Printed on the back of the Purifier and also on the Manual.
- Once your Airversa Purelle is discovered, Click to Add.
- Rename and Assign the room as the Air Purifier and Air Quality Monitor are connected.
- Finally, You have successfully connected Airversa Purelle to Homekit.
You can also access controls using the Siri Voice Commands. Enable it and enjoy!
NOTE TO REMEMBER:
When you add a device for the first time, It usually tends to take a little extra time -10-15 minutes. Once it gets connected to the Thread Network, It can connect Airversa Purelle to Homekit easily.
Purelle to Homekit using the SleekPoint App
Sleekpoint app is an App that works effortlessly with all Airversa Homekit-enabled Products. Using the Sleekpoint app, You can connect Purelle to Homekit Over Thread. Which Ultimately is its own innovative product. This app helps you access smart controls using the Thread with a Border Router on your iOS Device.
You can easily synchronize Sleekpoint with Apple Home and maximize your smart home experience.
- Install the Sleekpoint App on your iOS Device from the Apple App Store.
- Sign up and Create an Account.
- Connect the Purelle and Manage controls as you desire.
Purelle with Thread Technology for Homekit
With the built-in Thread that supports Homekit, Purelle has many other benefits to look out for.
- No WIFI is needed. Thread has Separate Networks for the Smart Home
- Create Mesh Network – You can add as many Thread Accessories as you want and make the network strong.
- Apple Home Hub- is required for Smart Home automation.
- Not tied to Single Hubs.
- Allows you to use and share the same Mesh Network and IP Address.
Airversa Purelle to Homekit not working
If there is any time Airversa Purelle to Homekit not working or you are unable to connect to Thread.Do follow these troubleshooting methods ;
- Reboot your Apple Devices and Connected Home Hubs.
- Make sure that Thread Network is connected.
- Unplug and Plug your Airversa into Homekit and Check.
- Check the Circuits and fuses and Try a different Power /AC Outlet.
- Ensure checking the filters.
Similar: How to Connect Molekule to Homekit ?
Wrap Up
With the help of a Thread-enabled Apple Home Hub, You will be able to Control Smart Home automation with Purelle on your SmartPhone.Anytime, Anywhere. Once you connect Airversa Purelle to Homekit, You can also enable Child Lock, Sleep Mode, Auto Mode, and a lot more. Add it easily through the direct method, and it is completely pain-free. Enjoy the best Air Quality and control it at an affordable price.