In recent times, Home Security has been the Prime Concern. Choose one that you can trust your Home with. And That’s Schlage for us. The Astonishing Technology, it has made easier to lock and unlock doors with just a Touch and Voice. You can literally monitor and manage from anywhere. Secure – From Front doors to each room making a smart home. This Article will glance you through – How to Connect Schlage Encode Plus to Homekit. And Thereby access the innovative, encrypted, and trusted security with Apple Key.
Is Schlage Encode Compatible with Homekit?
Yes, Schlage Encode Plus is compatible with the Apple Homekit. Currently, The Smart Locks are featured with this ability to make a smart home and work seamlessly.
- Schlage Encode Plus Smart WiFi Deadbolt .
- Schlage Sense Smart Deadbolt .
Both these are compatible with Apple Homekit on a Variety of Devices. Such as Apple TV,iPad, HomePod, HomePod Mini Apple TV.
Read also: How to Connect zwave to Homekit?
Does Schlage Encode Plus work with Homekit?
Yes, The Encode and the Encode Plus work with Apple Homekit. Install the Locks (Steps given below) and The General Procedure is the same for all the devices.
How to Connect Schlage Encode Plus to Homekit?
To Connect Schlage Encode Plus to Homekit, You will first need to Set it up with the Schlage Home App. Make sure that your Deadbolt is set up perfectly.
You can connect the Schlage Encode Plus deadbolt to Homekit in two easy ways.
- Through the Schlage Home App.
- And Through the Apple Home App.
Or Just Pair with the Schlage Home App, Then Link to the Apple Home App.
How to Set up the Schlage Home App?
Schlage Home App lets you connect, control, and automate your locks with the Apple Home App. Using an Apple Device as a Home Hub. You can simultaneously pair and automate your smart locks on Schlage and Apple Home Apps.
- Install the Schlage Home App and Open it.
- Tap on the Lock with a Plus icon- To Add a New Device.
- Now, Choose Schlage Sense/Encode/Encode Plus.
- If you haven’t installed the lock – Tap on Installation steps or Move on.
- Find the Programming code and Scan the QR Code.
- Press Hold the button on your lock. Release it.
- Wait until the app and lock complete pairing.
- Once Paired, Connect to a Reliable WiFi Network.
- Customize Location, Access Code, and Name. Click Finish.
- Complete the Auto- Configuration and the setup is done.
Overall, The App will thoroughly guide you through the Physical Installations. As well as the Initial Pairing and Connecting to your Home WiFi Network.
You can also set up the app through the Brilliant.
Connect to Homekit on Schlage Home App
Once you set up the Schlage Home App, Follow these steps to quickly connect to Homekit.
Choose Continue with the Homekit Option and Do as Prompted on the Schlage Home App.
Schlage Encode Plus to Homekit on Schlage Home App
Here are the steps to Add your Smart Home Device to the Schlage Home App;
- On the Schlage Home App, From the Dropdown Menu- Go to the Works With.
- Tap on Add Homekit and Follow the In-App Instructions.
- On the Add Accessory Notification, Take your Phone and Tap on the Interior Side of the Lock. Your Phone will scan the Homekit Code Label through the App.
- OR You can also Type in the Homekit Set up Code. (Appearing on the Insids of the Lock’s Interior).
- Once the Scanning and Pairing is done with the Homekit on the Schlage App.
- Click on YES and allow using Home Keys.
- You can also use the Express Mode.
What is Express Mode?
This Allows you to Unlock doors via an iOS Device- iPhone/Apple Watch and without a Face or Touch ID. Disable and Enable whenever you want to.
Check Out: How to Connect Linksys Router to HomeKit?
Connect Schlage Encode Plus to Homekit on Home App
Since, Schlage Encode Plus and the Sense Smart Deadbolt- Both are Homekit Compatible. You can directly Connect it to the Apple Home App and Control using the Siri Voice commands.
- Install and Open the Apple Home App on your iPhone.
- Click on + and Add Accessory.
- Find the Homekit Setup QR Code on your Schlage Lock or on the Quick Start Guide.
- Scan the QR Code or You can enter the Code on the label.
- When Prompted, Click on Add to Home.
- Once done, You can access Automation and Control using your iOS Devices and Siri.
Install Schlage Encode Smart Lock
NOTE: Use only a Philips Screwdriver not a regular power drill.
- Firstly, Remove the existing Lever/Knob/Latch on your door.
- Then, Install the Latch and Strike into the Door Frame.
- Now, Route the cables and Install the Touchscreen.
- Secure and Attach the Backplates.
- Now, Connect the cables and connector.
- Insert the batteries and cover the locks.
- Finally, attach the Levers and Test your Locks if it works.
- For a more detailed guide, You can refer here.
How to Connect a Schlage Sense Smart Deadbolt to Homekit?
Therefore, To Connect a Schlage Sense Smart Deadbolt – The Procedure is similar as well.
- Delete the Existing Lock from your Schlage Account.
- Pair Sense Smart and Choose the New Setup Option.
- This will set to Default settings and you will be able to add your new locks.
How to Fix Schlage Encode Plus to Homekit not working?
In case, there are any such troubles you are facing with Schlage Encode Plus to Homekit not working/not responding. Here are some steps to take.
- Check WIFI – Restart Router.
- Reset the Networks.
- Update the Smart Lock’s Firmware.
- Make sure to Install the Latest Version of the Apps.
- Connect to Homekit using the 8-digit setup code.
- Check the batteries on the Lock.
You may also like to know:Connect Roborock Device to Homekit
Final Note
With this guide, You can seamlessly Connect Schlage Encode Plus to Homekit effortlessly. A Simple Installation, Set, and Integration to Homekit is all you need to do. In Addition, These Smart Locks do work with SmartThings, So you can connect to it if you want to. With the fantastic Smart Lock technology, You can Lock and Unlock at your convenience and with the utmost security.