If you already have an eWeLink Smart Home, You are all set to Integrate it with Apple Homekit.In this piece of writing, you will find the Direct Method, with Step-by-Step Guidance on How to Connect eWeLink to Homekit.
Does eWeLink work with Apple Homekit?
Yes, eWeLink works seamlessly with Apple Homekit. Recently, eWeLink has announced Homekit Support on its Smart Home devices whether it is Matter enabled or not. This means You can now control your smart home devices directly on the Apple Home app and via Siri Voice Controls.
What eWeLink Products supports Apple Homekit?
All eWeLink Smart products support and work on a variety of Smart Home platforms such as Apple Homekit, Google Home, Amazon Alexa, Mi Home, IFTTT, and so on. It supports various brands such as Aqara, Sonoff, Shelly, Kaiser, Aeotec, Legrand, Woolley, Gledopto, Smartwise, WDYK, Nous, Kingart, Kingstone, and Conbee. Here are some of the best-known eWeLink products that you can connect to Homekit directly and automate on the Apple Home App.
- Alarms.
- Cameras.
- Curtain Rollers.
- Heating.
- Lights.
- Switches.
- Plugs.
- Thermostat.
- Valves and much more.
How to Connect eWeLink to Homekit?
Integrating eWeLink to Homekit to access automation on your Apple ecosystem is pretty easy as it supports Matter. However, there are different methods depending on the type of device you are using. For Matter-supported devices, you can directly connect to Homekit, but for devices with no native support, you will need to use a Matter Bridge to sync your devices with Apple Home. Here are some prerequisites that you need to ensure before moving on ;
- eWeLink App.
- A Stable and Common WIFI Network.
- Updated iOS device – iPhone or iPad.
- Matter supported Apple Home Hub -HomePod or an Apple TV.
- An eWeLink Matter Bridge for devices with No Matter Support.
Find your Device Type
To determine, which method you will be using to connect eWeLink to Homekit, make sure to identify your device type. To find the device type, Check on the Spec Sheet and the badges on the product box.
There are three types ; Matter supported , Zigbee, and WIFI devices . Find out which one you have and proceed to the Integration.
Also: How to Connect Sonoff Homekit?
Connect Matter-supported eWeLink devices to Homekit
Any eWeLink-supported Smart device that has a Matter Logo supports Matter can connect to Homekit directly. You can connect on both eWeLink and the Apple Home app.
APPLE HOME
To Connect eWeLink Matter devices on Apple Home, Open the Apple Home app >Tap the + icon > Add Accessory > Scan the QR Code available on your Product. You can also manually pair your device -Select More Options and Choose your Matter eWeLink device.
eWeLink App
Open the eWeLink App>Tap on Scan > Scan the Matter QR Code> Connect WIFI. To then add it to Homeapp – Select device settings >Enable Pairing mode >Choose Apple Home and Follow the in-app instructions.
Read more: How to Connect Matter with HomeKit?
Connect eWeLink to Homekit using Matter Bridge
eWeLink Smart Products such as Zigbee and WIFI do not natively have Matter support. So, you will need to use an eWeLink Matter Bridge to connect it to Apple Homekit. SONOFF iHost and SONOFF ZBBridge Ultra are two Matter bridges that are currently available. Follow the below stepwise instructions and connect No Matter support eWeLink devices to Homekit using Matter Bridge.
SONOFF iHost for eWeLink Homekit
The iHost is a Private Local server that can effortlessly connect and control all your Smart Home devices and Systems without any connectivity issues. It supports devices through Zigbee,eWeLink, Node-Red, and Yeelight LAN.
- Start by Setting up Sonoff iHost, log in using your credentials, and Complete the Initial Setup.
- Sync your eWeLink devices on iHost so that you can control them on the iHost.
- Navigate to the Home Page and Select Matter tab on the side menu.
- Choose Matter Bridge and Enable the Feature.
- You will get a Pairing Code – A QR or a numeric code displayed on your iHost Interface.
- Now, Open the Apple Home app on our iOS device, and click on the + icon.
- Add Accessory and Scan the QR Code on the iHost-Matter bridge Pairing mode.
- Follow the Onscreen prompts and complete adding your eWeLink to Homekit using the iHost Matter bridge.
- All devices paired on your iHost will now be available on the Apple Home app – Rename and assign rooms.
SONOFF ZBBridge Ultra
Another eWeLink Matter bridge is the SONOFF ZBBridge Ultra, it can connect and integrate your Zigbee devices to Third Party Smart Home Platforms. Below are the steps to use it to connect eWeLink to Homekit.
- Set up SONOFF ZBBridge Ultra manually and Pair your devices.
- Open the eWeLink app and Choose ZBBridge Ultra.
- Tap on the three dots and Open the Settings menu.
- Choose Matter and Tap on the + icon to get the Homekit setup code.
- Now, Open the Apple Home app >Tap + >Add Accessory > Scan the Code.
- Select More Options >Matter Accessory and Enter the numeric code.
Check out:How to Connect Aqara to Homekit?
Conclusion
With the help of the above guide, you can now seamlessly connect your eWeLink to Homekit and automate your smart home device at your fingertips. Enable Voice assistant features to use Siri and get your work done with just your Voice. For more Homekit Blogs , Check out ConnectHomekit.