Do you want to know How to Fix NUKI to HomeKit Not Working? NUKI is an amazing smart Lock and you can easily install it on your Door. It has a lot of features such as Carefree Living, All Function in One application, and Auto Unlock. But now are you struggling to use the Smart Lock Via HomeKit? Here in this article, we will share the troubleshooting ways and the proper procedure to connect the NUKI to HomeKit. Let’s Scroll down the Page.
How to Fix NUKI to HomeKit Not Working?
NUKI is a company that provides various home automation products like locks, Electronic Keyless doors, and so on. Also, you can use the NUKI app to control the accessories. The NUKI app is available for both Android and iOS Users. It allows access to all the features remotely without requiring a NUKI bridge. Activate the NUKI app directly at the cost of ₤49. The NUKI to HomeKit is officially compatible and controlled through iPhone, Apple Watch, Apple TV, or Apple HomePod.
If NUKI to HomeKit Not Working, There can be numerous reasons as follows;
- Poor Internet Connection.
- InCompatibility.
- Glitches and Bugs.
- Older Version of Software.
- Nuki 4 Pro and Homekit – Matter issues.
- Error on Scanning QR Code.
- Improper Installation process.
Also, Read How to Fix Homekit Automations Not Working.
Check the Internet Connection- NUKI to HomeKit Not Working
Ensure that, your NUKI Smart Lock needs a Stable Wi-Fi Connection to your Router. In case, your Wi-Fi Signal is limited then you must keep the router near your Smart Lock to optimize the connection. Restart your device and Nuki accessories to get rid of the Troubleshooting device.
Incompatibility Error of NUKI to HomeKit Not Working
1st generation of the NUKI smart Lock is not compatible with HomeKit.
If you are trying to connect the Gen 1 NUKI (Before the model of 2018) then you can get an error like incompatibility. To avoid all these kinds of errors must check out the Compatibility.
Whereas the NUKI Smart lock 2. O and 3. O generation is officially compatible with HomeKit. Also, the NUKI Smart Lock Pro 4 is integrated with HomeKit. Other than that, the Models above 2018 are compatible with the HomeKit.
ONLY NUKI 2.0 and 3.0 ARE COMPATIBLE WITH HOMEKIT.
Apple does not allow the integration of NUKI Bridge. You need to have a device with Apple Control such as a HomePod, or Apple TV. Suppose you want to control the NUKI Smart Lock without this device then you can connect through Bluetooth range.
Check the Guide, Homekit Apple TV 17.3 Not Working.
Update Bridge Software – To Fix NUKI to HomeKit Not Working
If you are connected to the NUKI with the matter, homebridge, hoobs, and so on. You should get the Firmware or software configuration from the official site to update the existing version Then, you should update the bridge software with the Nuki smart accessories. Also, ensure that the hub was plugged correctly to automate the NUKI device on Homekit.
Why the HomeKit Code Cannot be Scanned?
Sometimes the QR code for the Nuki device may get damaged or the QR scan sticker may get damaged – contact Nuki support. So to raise the queries, tap on Features & configuration >> General>> queries (ask the queries in detail).
- For the Smart Lock 3.0 (Pro) The QR Code will be available on the Back of the Devices.
- For the Smart Lock 2.0, you can get a HomeKit Code on the Bottom of the Devices.
Team support – you have to include the Smart Lock ID. That will be present on the NUKI App.
On the NUKI App–> Features & Configurations—> General Option.
Restart the NUKI Smart Lock
If your NUKI to HomeKit Not Working, Then you should Reset the NUKI Smart Lock and restart the home automation on Homekit. It may have a Chance to recover your smart lock from the problem.
- First of all, Remove the batteries or Power pack for a Short time.
- After that, Reinsert them into the device.
Now you can check out how your Smart lock works with HomeKit devices.
Update the NUKI Products – NUKI to HomeKit Not Working
If you have an Outdated version of the NUKI product with HomeKit. Sometimes it gets a struggle to work. So must keep your products in the latest version. If you want to know the Steps to Update the NUKI Products just try out upcoming steps.
Update NUKI App:
On the NUKI App–> Click the Settings Option–> Features & Configuration–> General–> Firmware Update–> Automatic Update.
Update Nuki On Web:
You have to choose the device in your NUKI Web account and activate the Automatic Updates “Automatic Updates” features under “Administration”.
The Firmware updates will be installed automatically and it keeps your device up to date without any manual interaction.
For More Info, Apple Homekit Not Responding Error
Manual Firmware Update
If you want to update the NUKI Smart devices manually. In case, any updates are available for the device then the NUKI application will notified. In addition, you can also find updates in the device settings.
- Click the respective device in the NUKI App.
- Then enter the device settings.
- Move to the Features and Configurations.
- After that, click the General Option.
- Select the Firmware Update.
Once the process is done then you can get the new and latest version of NUKI.
Still facing issues on Nuki devices like fingerprint issues or NUKI devices getting damaged – use customer support to exchange the Nuki devices and also clarify your issues with detailed support.
The Closing Off
I hope you guys know the solution on How to Fix NUKI to HomeKit Not Working. NUKI is a Smart Lock. Never miss to utilize all these amazing benefits. We have mentioned the right way to connect the NUKI to HomeKit. In case, if you face any problem while pairing or another situation, then just follow the methods we have shared in the above section. If you have any doubts related to this Guide, Let me know in this comment section.